Re: mpfi swap no crank
i cant if it dont crank i tryed push starting it and it kinda chugs like it wants to but dont :3
|
Re: mpfi swap no crank
if my crank angle sensor is bad would it not try and start, like nothin happens just click blah
|
Re: mpfi swap no crank
hahahahaha, that mpfi swaps a bitch when you dont pay attention :P
|
Re: mpfi swap no crank
wtf i did i wireed it exactly how it said to
|
Re: mpfi swap no crank
Originally Posted by teg91
wtf i did i wireed it exactly how it said to
Check for spark. Make sure all 4 injectors are firing |
Re: mpfi swap no crank
i cnat it doesnt crank at all
|
Re: mpfi swap no crank
check the volts in your bat normal, then watch the meter whike u start the car and see if they drop below 10v. if batt is good, check for a 12v batt suply on the starter. if u have that check that u are getting a 12v signal on your triger wire for the sdtarter. if u have all that then make sure your engine grounds are good, if they are u need a starter
|
Re: mpfi swap no crank
does your fuel pump prime?
|
Re: mpfi swap no crank
ok i can get thwe car to crank by giving it power straight from my batt so what wire did i ---- that would make it not get power to the start soliniod
|
Re: mpfi swap no crank
holy ---- you have two wires to the starter, one big from the battery for power and one little to activate the soliniod from the ignition switch. How the ---- did you manage a mpfi swap with zero knowledge?
|
All times are GMT -5. The time now is 10:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands