mini me dizzy
 

damn i have another mini me question this time its about the dizzy well i'm putting a b7 mini me in a hf and was told that i can "bore" out the dizzys bolt holes to match the z6 head and than just put a washer and be done with it will this work

Re:mini me dizzy
 

Im not sure what your talking about, but i have a question that may be similar and im going to thread jack!!!

Ok i have my Si dissy, on my Z1 head, and when im trying to fix the timing, i cannot move the distributor back anymore, because i guess its only on one bolt???

Is there any quick fix for this, my motor is hard to crank and i think that this is the reason.

And answer his ? too!

Re:mini me dizzy
 

okay i'll try to explain this the best i can without pictures..

with the distributor mounted on the d15z1/d16z6 head, the top "leg" and front "leg" are the ones that need to be modified. basically, enlarge the bolt hole all the way through the leg so instead of having a hole, you basically have a large slot. The top "leg" needs to have the front of it slotted out, and the front leg needs the to of it slotted out.

Re:mini me dizzy
 

Ok, so i have to make the hole larger, next time im under my hood ill check it out! thanks man