HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   mini me (https://www.homemadeturbo.com/hybrid-tech-8/mini-me-4001/)

themadhatter 04-19-2003 10:48 PM

mini me
 
ok i've heard of a mini me on a si block but can u do it with a dx std and hf block thanx peoples

"the poor man needs power to"

???

mOrEbOOst 04-20-2003 02:27 PM

Re:mini me
 
https://www.homemadeturbo.com/forum/...ges/search.gif<---works wonders...

The dx std blocks can be used, not sure of the hf block.

anothercivcSi 04-21-2003 04:36 PM

Re:mini me
 
if the block is a D series it will work. well it wil bolt up.. like on a 88-91 HF or 88-91 civic DX u would have to change over the wiring since the DX and HF has the duel point fuel injection

91rexBUG 04-21-2003 06:47 PM

Re:mini me
 
it wont work on the HF...all other blocks will work....the HF only has 8 valve reliefs...all other D blocks have 16 valve reliefs on the pistons. i have an HF motor...its only got 8...so S.O.L. on the HF

RENR 04-22-2003 01:46 AM

Re:mini me
 
but if you have an hf you can do this! http://hondaswap.com/articles/viewer.php?id=52

pissedoffsol 04-28-2003 11:28 PM

Re:mini me
 
have you ever done this swap? then please don't ------ internet BS around.

the DX head WILL work on the HF block. The fact that it has 8 valve reliefs, is what makes it potent- it gives it crazy compression.

the EX/SI VTEC heads will NOT work, as the valves will hit the piston top. However, the DX cam is not that wicked, and will in fact clear. Don't beleive the article? Clay the motor and find out for your self.
REmeber- this is stock parts. if you throw a bigger cam than the stock DX head, you may in fact hit. but stock for stock, it works. its been done. anyone who tells you it doesn't, is probably the same fucktard who says to run an LS tranny with boost cuz longer is better.

dizogg 05-02-2003 12:40 PM

Re:mini me
 
not all hf's have 8v pistons just the 8v heads ask jeff i think it was him that found 16v reliefs on a hf 1.5 8v engine.. so you would have to pull the head off to see as for the bolt patterns they should all be the same and the wiring is easy!!

HMT-Admin 05-02-2003 04:31 PM

Re:mini me
 
It was a D15b8 that had a 8valve head and 4 valve relief pistons... (civic cx) The HF does have 2 valve reliefs per piston, but it seems people are getting 16v heads to work on them... curious if a y8 or z6 head could work... ? who knows what would happen when vtec engauged! more lift SMACK! the pistons?

Jeff


All times are GMT -5. The time now is 04:36 PM.


© 2024 MH Sub I, LLC dba Internet Brands