map vaccum q's

Reply Subscribe

Thread Tools

Search this Thread

01-12-2005, 11:36 PM

spooolin

1.0 BAR

Thread Starter

Join Date: Oct 2004

Posts: 347

map vaccum q's

isnt your car supposed to die out when u pull the vac line going to the map sensor if so my car does not die out it actually ideal a little better.(smooter)thanks -adam-

01-13-2005, 12:06 AM

alwaystootall

1.5 BAR

Join Date: May 2003

Posts: 808

Re:map vaccum q's

it dies down a little bit tho,right? are u having problems with a jumpy idle?

01-13-2005, 11:19 AM

spooolin

1.0 BAR

Thread Starter

Join Date: Oct 2004

Posts: 347

Re:map vaccum q's

yea i dies down a little but than ideals better after its pulled off. and when its attached it bounces up and down but very bad like 1k 1.5k.

01-13-2005, 01:16 PM

whiterice

3.0 BAR

Join Date: Jun 2003

Posts: 3,975

Re:map vaccum q's

Quote:

Originally Posted by spooolin

isnt your car supposed to die out when u pull the vac line going to the map sensor

no. it just turns on a light when you start to drive.

01-13-2005, 01:21 PM

fsufan814

Guest

Posts: n/a

Re:map vaccum q's

if your idle is bouncing from 1 to 1.5k then you need to pull the IACV off the back of the manifold and clean it with some carb cleaner and or wd40, dry, reattach bam fixed

01-13-2005, 05:30 PM

spooolin

1.0 BAR

Thread Starter

Join Date: Oct 2004

Posts: 347

Re:map vaccum q's

Quote:

Originally Posted by fsufan814

if your idle is bouncing from 1 to 1.5k then you need to pull the IACV off the back of the manifold and clean it with some carb cleaner and or wd40, dry, reattach bam fixed

thats been done but thanks anyways.

01-13-2005, 11:53 PM

fsufan814

Guest

Posts: n/a

Re:map vaccum q's

i would try it again and get it clean this time

01-14-2005, 02:24 PM

warric_k

1.5 BAR

Join Date: Sep 2003

Posts: 708

Re:map vaccum q's

check your idle screw on the throttle body. fiddle with it.

01-14-2005, 03:25 PM

Guy-Fast

0.0 BAR

Join Date: Dec 2002

Posts: 0

Re:map vaccum q's

Your not pulling the map sensor line then becasue when you have no map hooked up you will get a cel and the car will idle and run like it's on 3 cylinders. You have a vacuum leak somewhere check with a pressure gauge

01-14-2005, 04:14 PM

#10

fast2camciv

1.0 BAR

Join Date: Apr 2003

Posts: 384

Re:map vaccum q's

if you pull the vac line to the map, the car should die. i know mine does. maybe you have a bad map or something. why are you pulling the vac line from the map anyways? i mean what was the car doin that made u pull that?

Reply Share

First
Prev
1 / 2
Next
Last