make speedo cable work without clip
hows a nigga do it?
im going to try wrapping the upper part in teflon tape and jammin it in... dont make me jbweld this bitch. |
Re: make speedo cable work without clip
Just stick it in? I've never used clips.
|
Re: make speedo cable work without clip
Mine doesn't want to stay in even with the clip, so I just get down as far as it'll go in the drive and zip tie the cable to a hose to keep it in place.
|
Re: make speedo cable work without clip
18 gauge wire. strip the covering off it, twist it up. stick the cable in, then twist the wire around the sensor in the groove.
|
Re: make speedo cable work without clip
do you like it when I play with your nipples????????
|
Re: make speedo cable work without clip
im confused with my speedo cable also. managed to save a crx from the crusher. problem is that its pretty much bare. the yard threw a running motor in there but barely hooked ---- up. never really had much experience with an actual cable instead of the sensor thats in the newer cars. cable isnt hooked up, found were it looks like it should go but the speedo still doesnt work. haynes manual is much help and i can buy a replacement cable from parts stores or even the dealer.
anybody care to shed some light on the subject. what the cable should look like(to make sure that its still intact). |
All times are GMT -5. The time now is 05:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands