Ls/Vtec axle problems
 

I have a problem with the axles in my car. Iam using 91 integra axles in my Bseries swap. My car is a 90 crx. The passenger side axle is fine, but the driver side is another story. When we finished putting everything to gether and we tried to take the car for a test drive the car started to shimmy like the wheel was going to fall off. we canged the driver side axle and intermediate shaft to a 94 which we all know does not work permanently because the shaft does not seal with the tranny and it causes the tranny to leak oil like crazy. but we tried just to see if it was the axle and the the car drove fine. So we came to the conclusion that it is the driver side axle or intermediate shaft. I changed the axle three times at discount auto parts and it still does it. SO what intermediate shaft do I use. Any help will be highly appreciated. thanks

Re: Ls/Vtec axle problems
 

did u take the dust seal of the outer cv joints?

Re: Ls/Vtec axle problems
 

you need an integra 90-93 intermediate shaft

Re: Ls/Vtec axle problems
 

Ok, so the 90-93 shaft should work with the 91 axles correct?

Re: Ls/Vtec axle problems
 

Yes Sir

Re: Ls/Vtec axle problems
 

thanks

Re: Ls/Vtec axle problems
 

Havin a bit of troble finding the shaft for cheap. I mean CHEAP. so do you guys think 92-95 civic hubs will fix the problem?

Re: Ls/Vtec axle problems
 

do you think the 92-95 hubs will work or should I go with the 90-93 integra hubs.

Re: Ls/Vtec axle problems
 

lol....everyone here is so cheap....i know ebay has a bunch of "Stage 1" axles for cheap.

http://motors.search.ebay.com/90-93-...Z6000QQsaspiZ2

also on the bottom of the list there is some used ones....

i have some halfshafts from a 94 integra if u want em...dont know if they would work but they are for sale.

Re: Ls/Vtec axle problems
 

shut up bitch, dumbest comment ever.