Slo_crx1 |
02-15-2006 09:53 PM |
Re: ls swap in a crx si...
If it's a obd0 LS motor, then you can use the entire wiring from the Si and pretty much plug it in. The distributor has a different bolt pattern, but still will plug into the harness. Obd1 has different plugs for the engine harness, plus the distributor is completely different. I know that for obd0 you need a pr4 ecu, and it will plug directly into the Si harness as well. Off the top of my head i can't remember what the obd1 ecu code is, but i do know that you would need an adapter harness to use the obd1 ecu with the obd0 harness. Hope this helps some.
|