HomemadeTurbo - DIY Turbo Forum
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   LS integra parts interchangability (https://www.homemadeturbo.com/hybrid-tech-8/ls-integra-parts-interchangability-33507/)

Slo_crx1 01-19-2005 03:56 PM
Re:LS integra parts interchangability
 
Now there's some useful info...thanx Tweek ;)

JoeD427 01-20-2005 07:43 AM
Re:LS integra parts interchangability
 
Originally Posted by whiterice
what parts do you need for it?
All of the ones listed in my first post, I don't have a car yet.

Racintweek 01-20-2005 07:59 AM
Re:LS integra parts interchangability
 
any b-series h20 or oil pump will work
ECU for OBD2 LS's are the same
any b-series t-stat
in know there is more but im having a brain fart

JoeD427 01-20-2005 09:23 AM
Re:LS integra parts interchangability
 
what about the differences between obd2a and obd2b?

Racintweek 01-20-2005 10:38 AM
Re:LS integra parts interchangability
 
usually when the OBD of a car changes the engine gets more sensors and the existing one get differnt connectors

im not familiar w/ OBD2a or b but im sure its the same principle

shmaptoe 01-24-2005 09:48 PM
Re:LS integra parts interchangability
 
Originally Posted by tranceminister
Nope, both are 240cc saturated injectors, so you'll be fine switching between the OBD1-OBD2 injectors. Both the same.
plugs on the harness and injectors are different. you cant get obd1 injectors on an obd2 harness. you can however get obd1 harness plugs and cut and splice them into your obd2 harness to use obd1 injectors. this is what im going to do in order to use bosch 42lb injectors on my obd2a motor

Guy-Fast 03-07-2006 08:58 PM
Re:LS integra parts interchangability
 
Originally Posted by Racintweek
90-91 130hp, tiny intake manifold, small cams, FITV on t-body, peak and hold inj

92-93 140hp, small intake manifold, small cams, FITV on manifold, saturated inj

94-01 142hp, big intake manifold (relatively speaking), big cams, saturated inj

92-93 uses a bigger alt belt than 90-91
92-93 and 90-91 use different clutch discs

please correct me if im wrong but i believe the 90-93 and 94-01 have different head castings, the 94-01 having a little bigger ports, but are interchangable either way

i believe there are other differneces between A's and B's(not relating to the longblock), but i dont want to post incorrect info


Yes the 90-91 ls heads do have smaller ports compared to the newer 92+ ls's motors. I dont have exact #'s has this is just first hand experince and I just looked. I have a few in my garage I may measure but I doubt it

Racintweek 03-07-2006 09:44 PM
Re: LS integra parts interchangability
 
do some searching on nonvtec.com


edit: damn, wrong thread and that site is down with server/bandwidth problems

bipedbear 03-07-2006 10:25 PM
Re: LS integra parts interchangability
 
Originally Posted by Racintweek
do some searching on nonvtec.com


edit: damn, wrong thread and that site is down with server/bandwidth problems


works for me??

Racintweek 03-08-2006 07:00 AM
Re: LS integra parts interchangability
 
damn, i got 404'd earlier. they need to get a bigger/better server.

there is a thread with the port sizes/volumes between the 3 diff LS engines.


All times are GMT -5. The time now is 06:50 PM.
Page 2 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands