low compression
#1
low compression
i just put a new y8 head on my y8 block and i was adjusting the valves i used feeler gauges and it all should be close to perfect as can be... the timing is right on the crank and head were both at tdc and now im not getting any compression except for 30 in the number 2 cyl?? what the hell is wrong
#4
Re: low compression
Is the head torqued properly? how was the head? was it used?
explain the scenerio better, why was it apart?
Sometimes it takes a lot of cranking to build some compression, take the plugs out and squirt down about a cap full of oil in each cylinder. try to start, then do a comp test..
explain the scenerio better, why was it apart?
Sometimes it takes a lot of cranking to build some compression, take the plugs out and squirt down about a cap full of oil in each cylinder. try to start, then do a comp test..
Thread
Thread Starter
Forum
Replies
Last Post
Hellbert
Forced Induction
27
05-04-2008 11:31 PM