lookin at a car, need some help with a problem
im lookin at gettin a 91 accord with a turbo kit on it, to get back into a turbo car.. its cheap but has a problem
the guy slid it into a curb, he replaced the control arm, and that centered the wheel while sitting and driveing.. i had him back it up and drive it forward for me and backwards its fine (it was in nuetral just coasting) driveing forward, the top of the wheel started leaning outwards any ideas on what would cause that and how cheap/expensive its gonna be to fix? |
Re: lookin at a car, need some help with a problem
i think u should just buy a rope
|
Re: lookin at a car, need some help with a problem
Originally Posted by dpost-----
i think u should just buy a rope
did you check the upper control arm? balljoint? |
Re: lookin at a car, need some help with a problem
the upper control arm looks straight (the lower one is what he replaced0, as well as everything connected to it, the balljoints boot is torn but im not sure if that could be what is causeing this
i tried to get the wheel to lean while i had the car jacked up but it only does it while the wheel has power on the ground |
Re: lookin at a car, need some help with a problem
donald bought my car with the same problem.
i hit a curb and everything looked okay. he replaced the knuckle and it straightened out the wheel. hard to eyeball it. |
Re: lookin at a car, need some help with a problem
i was thinking the knuckle to last night
but the wheel is straight while sitting, and leans when under power, is that what was happening with yours? since he'd already replaced the lower control arm he was thinking it was the subframe but if it was the wheel would be leaning all the time instead wouldnt it? |
Re: lookin at a car, need some help with a problem
the one on ness?
if so, it looks like the sub frame is out of place... |
Re: lookin at a car, need some help with a problem
yeah the green one
how can you tell if its out of whack or not? and like i said if the subframe was bent wouldnt the wheel lean all the time instead of only when its under power? |
Re: lookin at a car, need some help with a problem
did he remember to put the axle nut back on? seriously...
that will cause the wheel to lean at the top, i know because i forgot once :1 |
Re: lookin at a car, need some help with a problem
lol if thats all it is i'll deffinitly snag it up, i'll have to go look at it again this week
|
All times are GMT -5. The time now is 10:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands