Linkage question.
so i cut and welded my integra linkage to fit my crx. cut like 1 7/8" off of each piece. I got the shaft w/ the bitch pin off a little bit as far as straightness, and it doesn't shift right (suprise suprise). i can find 1-2-3 and 4 but can't find 5th or reverse. The mounts I got were ebayers, so i'm going to just buy a good quailty linkage, so the question is.. Can I use a brand name linkage w/ my ebay mounts?
|
Re: Linkage question.
its hard to say but you might have to rig it a little but they should be close
|
Re: Linkage question.
Originally Posted by chris
its hard to say but you might have to rig it a little but they should be close
|
Re: Linkage question.
Originally Posted by crxmatt2
yeah, that's what I was thinking, as long as they're straight they should be ok.. Oh yeah, did you ship my ---- out yet?
going out tonight |
Re: Linkage question.
original spec was 2 3/8" via HASport.
I know, we did a set at 2 3/16" and the shifter was damn near hitting the dash. Ask Fowee on here. |
All times are GMT -5. The time now is 09:23 AM. |
© 2024 MH Sub I, LLC dba Internet Brands