jdm front disc
 

when i got my b16 sir1 i got the whole front supension to i was just wondering if i would gain anything buy using the jdm hubs disc and calapers on my 91 crx dx and i i do what pads i buy for it

Re: jdm front disc
 

Your best bet would just be to look at your stock suspension and see if the JDM ---- looks bigger. If it is, upgrade, if not, leave it stock b/c it would be a waste of time. :y

Re: jdm front disc
 

I know for a fact that the EF SiR brakes are bigger and better than the dx stoppers. Even the usdm ED Si front brakes are larger, but mostly in the caliper and pad, rotors are almost the same size. Maybe you'll luck out and they'll be the same as the civic ex fronts...same size as 90-93 integra fronts. Oh, and while you're at it, pick up a rear disc conversion from an Si or DC integra and the proportioning valve...trust me...you'll love it ;)

Re: jdm front disc
 

yea thats what got me thinking of the front i been looking for a rear disc swap but at 250bones i dont know then i was like wait a minitue i got the jdm fronts so ill have to get them and compare

Re: jdm front disc
 

there will be a camber issue with those brakes so you better have a camber kit

Re: jdm front disc
 

wont that depend on if its from a integra or crx/civic

Re: jdm front disc
 

i got a camber kit on the rear you talking about the rear or front?

Re: jdm front disc
 

People say that you have camber issues with the Integra Setup in the from. I didn't notice when I used them, but I had a front Camber kit already.

YES SiR brakes are bigger. I have all 3 in my shop, dx what came on the car, Integra, what I run now, and SiR from my RHD Clip. The Brakes on the SiR are bigger then the Dx and the same size as the Integra.

For disc and pad, my guess is that they are the same as the Integra one. I can check, buit I'll never get time!!!

You'll want to run the proper prop valve and a bigger master cylinder from a Prelude, Interga or the SiR.

Yes it brakes better. I have complete Disc from an integra on my gutted hatch, stops on a dime.

As for Rear Discs. If you paying250.00 I think your getting ripped off!! I paid 50.00 A side Canadian Dollars. Had to get new pads and rotors, but I would always do that no matter how good of condition they came in!!! PLus Pads and rotors are cheap. I still came under 250CAN in the end!!!

Re: jdm front disc
 

Thats the market value though on them. I have sold 5 sets at that price in the 200-250 range+shipping

Re: jdm front disc
 

Now why would an SiR use an integra from spindle and brake setup? That's kinda weird, cause from everything i've seen and heard, the 4 door civic ex's had regular civic spindles, but with the integra sized rotors and calipers to get around the camber issue. You would think that if anything they would put those on the front of an SiR. At least how i see it anyway ;D