JAW wide band How to mount???
? so far all of come up with is leaving it on the floor 
04-12-2008, 01:46 AM
#3
1.5 BAR
Thread Starter
Join Date: Nov 2005
Location: Harford Co. MD
Posts: 1,241
Re: JAW wide band How to mount???
lmao.. 
It fits nicely in the ash tray... just shut the ash tray so it holds it in place.. unforunatly still looks like poop, but it is in eye view now so who gives a ----
It fits nicely in the ash tray... just shut the ash tray so it holds it in place..
unforunatly still looks like poop, but it is in eye view now so who gives a ----
04-12-2008, 01:25 PM
#4
1.0 BAR
Join Date: May 2005
Posts: 423
Re: JAW wide band How to mount???
i find it less bothersome to have it in the glovebox, but nailing it to the window is a good suggestion... (seriously? mount it like any other Bosch LSU, find instructions for a zeitronix or something, ok after 1 minute of searching, i'm copying Zeitronix info for the sensors installation...)
and after reading your worthless post, i realize you just want to mount the ------ meter, not the sensor, which makes you a worthless toolbag, get some ------ body tape and ghettoly stick the ---- somewhere.
The Wideband Oxygen sensor must be positioned after the turbocharger and before the catalytic converter. Recommended installation
requires welding the O2 sensor bung in the down pipe at least 16” away from the turbo. A stock narrowband O2 sensor location is
usually too hot for the wideband O2 sensor. The oxygen sensor must be positioned vertically (wires pointing upwards between 10 and 2
o’clock) to prevent cracking of the sensor ceramic element and protect sensor against water condensation.
requires welding the O2 sensor bung in the down pipe at least 16” away from the turbo. A stock narrowband O2 sensor location is
usually too hot for the wideband O2 sensor. The oxygen sensor must be positioned vertically (wires pointing upwards between 10 and 2
o’clock) to prevent cracking of the sensor ceramic element and protect sensor against water condensation.
04-13-2008, 12:32 AM
#5
1.5 BAR
Thread Starter
Join Date: Nov 2005
Location: Harford Co. MD
Posts: 1,241
Re: JAW wide band How to mount???
---- nog ^^^^^
i clearly stated that its in the ash tray....
Im sure that it would satisfy even the gheto of gheto mother ******* like your self... but thank for the other ---- you posted, cause i dont have my sensor positioned virtical...
so in all of your atempt to be smart ***, you have provided me with some helpfull informaion...
so i do say thankyou sir.... thank you.
i clearly stated that its in the ash tray....
Im sure that it would satisfy even the gheto of gheto mother ******* like your self... but thank for the other ---- you posted, cause i dont have my sensor positioned virtical...
so in all of your atempt to be smart ***, you have provided me with some helpfull informaion...
so i do say thankyou sir.... thank you.
Thread
Thread Starter
Forum
Replies
Last Post
