intake manifold swapping?
 

will the intake manifold for my 92-95 dx fit on a D16A6 head?

Re:intake manifold swapping?
 

Yes every SOHC D serie Manifold are switchable

Re:intake manifold swapping?
 

but will a 96 y8 fit onto a 99 y8 since they are differant OBD's?

Re:intake manifold swapping?
 

As long as your will to "make stuff work" any manifold will interchange with any D-series ( minus the ZCs of course ).

You could put a DPFI manifold on a 99' Y8 if you really wanted too...

Re:intake manifold swapping?
 

96 y8's should be obd2 as well i would think

Re:intake manifold swapping?
 

96-00 have teh same manifold. the OBD2a and OBD2b does not make a diffrence here.

Re:intake manifold swapping?
 

sensors, sensors, sensors. that's what it really comes down to. all d series' bolt up sure, but getting them to work properly is the problem. My extra z6 mani bolts to my a6 head, but it's one sensor short of a6 mani and it relocates one sensor from side of #4 runner to back of #3 runner. not a problem, but the missing sensor.....

Re:intake manifold swapping?
 

True, its a little confusing, but just make sure all your sensors have a plug plugged into them and you should be fine.
That sensor you speak of that's on the back of the Z6 intake is missing on my friends greddy turbo'd CRX, he's NEVER USED THAT SENSOR EVER, OR so he claims..

Re:intake manifold swapping?
 

i thought in 98 or so they added a air injection thing (obd2b ??)

Re:intake manifold swapping?
 

you dont need all your sensors, when I did my b16 swap I only used the sensors that throw cel, all others where forgotten, o2,map,iac, and tps. no knock, no egr, no purge.