intake manifold swap instructions ?
 

hello everybody..

anyone have/know where i can get instructions for this intake manifolds swap?

from this:

http://img345.imageshack.us/img345/9...qzmxk1nde3.jpg
to this: ?

http://img422.imageshack.us/img422/8089/img20593ko.jpg


thanks

Re: intake manifold swap instructions ?
 

Just slap er on.

What is the original IM from? What is the new IM from?

Re: intake manifold swap instructions ?
 

looks like a y7 to a z6...if you want a full write-up on it try (bites tongue) turbod16.com, i know there is one there. its actually fairly easy to do though

Re: intake manifold swap instructions ?
 

just make sure to have all your sensors

correct throttle body

new gaskets/water lines and your good to go along with the corretc throttle bracket for the matching manifold

Re: intake manifold swap instructions ?
 

Keep in mind you run a 3 wire IAC valve and that manifold runs a 2 wire. So, you either have to use your throttle body with the cable rotor from a Y8 or Z6 throttle body or you have to convert to OBDI and do the 3 wire to 2 wire conversion.

Re: intake manifold swap instructions ?
 

bolt pattern is way off to but a 92+ civic tb on a 88-91 manifold so he will have to either grind the piss out of the mounting holes in the y7 tb or convert to 2 wire