installing LSD
I bought a Lsd(not a phantom grip!) for my b16a transmission, and I would like to know what seal will I need to purchase to install it properly. THANK YOU!
|
Re:installing LSD
what seal?...its a good idea to change your axle seals
|
Re:installing LSD
I was thinking input and out seals, bearing seals, axle seals, but I'm not sure, but I'm pretty sure there will be damaged seals from dissasembling the diff. just want to make sure I get everything right so when I get back, the only thing I have to do is put it together.
|
Re:installing LSD
Originally Posted by rudebwoy
I was thinking input and out seals, bearing seals, axle seals, but I'm not sure, but I'm pretty sure there will be damaged seals from dissasembling the diff. just want to make sure I get everything right so when I get back, the only thing I have to do is put it together.
|
Re:installing LSD
ok thanks! just want to make sure I dont need anything extra.
|
Re:installing LSD
make sure you order diferential bearings and extra shims, cuz you will need them to do the install right. Shims come in different sizes, so you can order diff. sizes or you can wait unill you install the lsd and measure the gap and then order the size you need. But if you do that you will have to wait for the shims to show up, cuz they never have them in stock. Well that was my experience. Good luck. 98ctr
shim #11, bearings #17 2ea. don't forget acuraautomotiveparts.org http://acuraautomotiveparts.org/acur...13ST70_M01.gif PS: If you order the bearings, order the Type R bearing. and shims. ie: 1.0/1.25/1.5 |
Re:installing LSD
|
Re:installing LSD
If youd like specific tips, call a transmission shop, they will help you out, but 98 ctr seems to have helped u already
so good luck and let us know how that phantom.. i mean lsd x hooks up |
Re:installing LSD
Hey make sure you do a nice write I'd like to see it done.
I followed that one link and I was reading the break in paragraph and thinking to myself, either 1) I'm going to have so much fun that I'll literally pop my wheels off, 2) I'll get so dizzy that I'll puke after 30mins of doing the figure 8 or 3) some bitch@$$ cop is going to pull my sorry ass over in the parking lot Do this for 30 mins! http://tech.hybridgarage.com/tech/lsd/breakin-s.jpg |
Re:installing LSD
its gonna be a while before I do this, but I wish someone will do a sticky on this topic so dont have to ask this again, just gathering parts for now., I got like 9 months left in this dump of a country. thanks for all the help.
|
Re:installing LSD
---- that figure 8 ---- for 30 minutes haha. I'm glad I got a Quaife LSD. Jeff did a big fatty burnout to break mine in lol. ;D
|
Re:installing LSD
That figure 8 bullshit is only for clutch type LSD's (KAAZ) which IMO are inferior to a Quaife which is by far the best LSD out there
|
Re:installing LSD
why is it that I get the idea that phatomgrip is not a good LSD kit when reading this thread?
|
Re:installing LSD
Originally Posted by StockHonda
why is it that I get the idea that phatomgrip is not a good LSD kit when reading this thread?
__________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re:installing LSD
Originally Posted by Dr.Boost
Originally Posted by StockHonda
why is it that I get the idea that phatomgrip is not a good LSD kit when reading this thread?
|
Re:installing LSD
the lsd I got is a torsen from a civic type R/sir, will I still have to do that figure 8 ---- to break it in? or since its a factory part it should install and drive...
|
Re:installing LSD
no you do not. Only if its a brand new LSD then you have to brake it in. If its used then it should be broken in from the factory. 98ctr
|
Re:installing LSD
SWEET! ;D
|
Re: installing LSD
started the install today, and I am stuck. I did all kind of research and none of these are thorough. I need to know if I need to pressed the lsd into the housing to get it to seat correctly?
|
Re: installing LSD
lightly tap with a rubber hammer.........
|
Re:installing LSD
Originally Posted by rudebwoy
the lsd I got is a torsen from a civic type R/sir, will I still have to do that figure 8 ---- to break it in? or since its a factory part it should install and drive...
|
Re: installing LSD
does the sir lsd even fit into a normal box? I heard something somewhere about the box needing machining to allow the lsd to seat properly :-\
|
Re: installing LSD
you have to grind off the webbing on the inside of the transmission where the lsd sits
|
Re:installing LSD
Originally Posted by rudebwoy
the lsd I got is a torsen from a civic type R/sir, will I still have to do that figure 8 ---- to break it in? or since its a factory part it should install and drive...
|
Re: installing LSD
Dang it where the heck is the write up y0! I am still planning on doing this... Probably gonna get myself the OBX LSD... we'll see... sh!t
|
Re: installing LSD
Here's a write-up
Get OBX and needed parts lay on new speedo gear, press on new bearings. Rip apart the tranny, swap the diffs. Check shim clearance, adjust as needed. Replace ISB. Put tranny back together, install into the car. When on doubt, follow the Helms. Parts needed.......... http://home.cinci.rr.com/mistab0ne/h...Xdiffparts.jpg |
Re: installing LSD
Originally Posted by Mista Bone
Replace ISB. BTW, your write-up sucks. :P __________________ Best Car Insurance | Auto Protection Today | FREE Trade-In Quote |
Re: installing LSD
Thanks for the help Mista Bone. You are still indeed the tranny guru.
I remember reading I need a gear pressor or something to put the speedo gear on... anyone want to shed some light on this? |
Re: installing LSD
Input Shaft Bearing.
I'm not a writer, but a hands on teacher. |
All times are GMT -5. The time now is 05:52 AM. |
© 2024 MH Sub I, LLC dba Internet Brands