I bought a Lsd(not a phantom grip!) for my b16a transmission, and I would like to know what seal will I need to purchase to install it properly. THANK YOU!

 

I was thinking input and out seals, bearing seals, axle seals, but I'm not sure, but I'm pretty sure there will be damaged seals from dissasembling the diff. just want to make sure I get everything right so when I get back, the only thing I have to do is put it together.

 

ok thanks! just want to make sure I dont need anything extra.

 

make sure you order diferential bearings and extra shims, cuz you will need them to do the install right. Shims come in different sizes, so you can order diff. sizes or you can wait unill you install the lsd and measure the gap and then order the size you need. But if you do that you will have to wait for the shims to show up, cuz they never have them in stock. Well that was my experience. Good luck. 98ctr

shim #11, bearings #17 2ea. don't forget

acuraautomotiveparts.org



PS: If you order the bearings, order the Type R bearing. and shims. ie: 1.0/1.25/1.5

 

http://tech.hybridgarage.com/tech/lsd/

 

If youd like specific tips, call a transmission shop, they will help you out, but 98 ctr seems to have helped u already
so good luck and let us know how that phantom.. i mean lsd x hooks up

 

Hey make sure you do a nice write I'd like to see it done.

I followed that one link and I was reading the break in paragraph and thinking to myself, either 1) I'm going to have so much fun that I'll literally pop my wheels off, 2) I'll get so dizzy that I'll puke after 30mins of doing the figure 8 or 3) some bitch@$$ cop is going to pull my sorry *** over in the parking lot

Do this for 30 mins!

 

its gonna be a while before I do this, but I wish someone will do a sticky on this topic so dont have to ask this again, just gathering parts for now., I got like 9 months left in this dump of a country. thanks for all the help.