crxrx7

How would you know if your injectors are working. Is there a way to check the injectors with an ohm meter or check the ecu to see if there are pulses coming from the ecu?

Slo_crx1

Noid light like I posted in your other thread. Ask your auto parts store for one...should have them with the test equipment.

0b00st0

You could always unplug the injectors one at a time while the engine is idling. You'll be able to tell when one isn't working.

crxrx7

thats the problem. The car doesn't run.

-SKUM-

Dose the car have spark? If it dose then shoot some starting fluid in the bitch and fire it up.

crxrx7

thats what I did and it still didn't start for some reason. I can just go down the road and spray staring fluid in there. I'll need to buy it in bulk.

-SKUM-

After trying to start it are your spark plugs wet? When you key the car to the run position do you hear the fuel pump prime? Pull a plug wire off and stick a spark plug in it and have someone turn it over to see if you have spark. Need spark air and fuel to run, if you dont have that it wont start, but you arnt a noob so I shouldnt have to say that.

crxrx7

Yeah I am no noob. I have checked my spark, fuel, and just about everything I could think of. I think that it is either my grounds are bad or my ecu is done. I am getting another ecu to try it out. It started once but then died. I think what happened was when I wired my injectors for the obd1 injectors they didn't like it and fried my ecu. But the first time I cranked it it spit some fuel in there, started, and then fried and died right after. So it did run for like 2-3 seconds. So I know it will run. I have put some obd0 injectors in it since and tried that but no luck yet. I did pull out the brand new plugs I put in there and I smelled very little of anything. I think that it was just the old oil that was on the treads of the plugs.

Walter

first off , what is ur car? is it all stock? are u runing with satured or P&H injectors? ecu chipped? let us to know more about ur car

crxrx7

Its all back to stock Si but with a d15b7 engine. I put the Si injectors back in there and everything. Who knows.