injector question on a ls/vtec
05-25-2005, 10:37 PM
#1
1.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 1,068
injector question on a ls/vtec
ok I am in the process of getting my ls/vtec to run right again after the rebuild. it is all broke in now and I am having tunning issues with it. does anybody know what the max hp you can run on stock obd2 injectors from a 97 dx I belive these are 240's this is a all motor setup. I am running a vafc and it seems that not matter how hight I set the correction It doen't make a difference the timing is curently really retarded due to dodging det. any ideas what I can do to tune this better and what is the max hp on a setup 240's NA all the way.
thanks
thanks
05-26-2005, 01:05 AM
#2
Administrator
Join Date: Dec 2002
Posts: 13,991
Re: injector question on a ls/vtec
Are you using a wideband to tune? how do you know its not making a difference? alot of people put adj pressure regulators on the fuel rail so you can bump pressure up to get the max out of the little 240's.
05-26-2005, 05:35 AM
#3
1.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 1,068
Re: injector question on a ls/vtec
no i am not running a wideband but if the car is at idle and I adjust the vafc at 1k to 50% + car runns no different and I can't smell any fuel in the exaust usually you can smell the unburned you know what i mean this still smells the same. I know not the most acurate form and also when I adjust it in the higher rpms there is no power difference. I was just wondering if 200 to 210 whp would more then max the injectors out or not
05-26-2005, 07:17 AM
#5
3.0 BAR
Join Date: Feb 2003
Posts: 9,089
Re: injector question on a ls/vtec
dx obd2 injectors = d16y7 right?
I thought they were smaller than 240cc?
according to this, 96-97 d16y7 injectors are 180cc.
http://www.accordinglydone.com/data/injectors.php
also some debating here...
http://www.d-series.org/forums/showt...ybrid&t=11043s
I thought they were smaller than 240cc?
according to this, 96-97 d16y7 injectors are 180cc.
http://www.accordinglydone.com/data/injectors.php
also some debating here...
http://www.d-series.org/forums/showt...ybrid&t=11043s
05-26-2005, 08:24 PM
#6
1.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 1,068
Re: injector question on a ls/vtec
well come to think of it I might have the ex vtec injectors I thinks I swaped them over from my mini me they were from a 98 ex so I should have 240's either way I think. anyways I was just wondering basicly has anybody tuned with these injectors and what will the supports at the wheels. like I said this engine should be pulling down around 200+ whp any NA guys out there help
05-27-2005, 08:56 AM
#8
3.0 BAR
Join Date: Jan 2003
Posts: 4,438
Re: injector question on a ls/vtec
you need to check your afc wiring. When i was n/a if i went -32 on the fuel at idle, the engine died. If i went +37 (i think... i cant remember now though, the engine stumbled and died. I think you might have it wired in wrong.
05-27-2005, 03:37 PM
#9
1.5 BAR
Thread Starter
Join Date: Aug 2003
Posts: 1,068
Re: injector question on a ls/vtec
I doubt it but then again jake did wire it in pretty quick before the meeting one night so lol I am not so sure we will see tonight at the track how she does times to come and hopefully no breaks tonight can't handle that again
