HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Idle problem (https://www.homemadeturbo.com/hybrid-tech-8/idle-problem-11223/)

zippeay 10-28-2003 11:23 AM

Idle problem
 
Hey what's up all, I like your forum. Anyway I've done searches and tried everything under the freaking sun. I've changed my IACV, map sensor, throttle body "with new TPS sensor" adjusted the idle screw. Nothing seem to make my idle act right. It does what ever it wants all the time, sometimes it jumps from 700-1200. Sometimes it idles at 1500 some times it idles at 550. Any idea's? I'm getting ready to put my turbo on but I want to fix this first "I'm paranoid that somethings going to screw up my engine". I don't know what else to do, I'm getting so frustrated. Thanks for any help :-\

88crxSi 10-28-2003 11:27 AM

Re:Idle problem
 
hrmm.. all that replace.. im assuming you have reset the ecu and set idle as per PROPER instructions via the manual?

possible a kinked/loose/clogged vac line is all i can think of otherwise.

zippeay 10-28-2003 01:35 PM

Re:Idle problem
 
Well actually I hadn't tried that, so I will, hopefully this works, thanks

yungtuner 10-31-2003 10:41 AM

Re:Idle problem
 
i am haveing a similiar problome, though i havent tried much yet. i replaced my tps, took the throttle body off to do that, and when i put it back on, the car is idling funny. well when i first start it, it will rev at like 2500 and slowly go down, warming up, it did it beofre i changed the tps, just checking if thats normal. but now, since the tps swap, it will rev to about 1500 then drop to about 1000 then back to 1500 and so on. i am thinking vac line, but how do i check them?

88crxSi 10-31-2003 12:06 PM

Re:Idle problem
 
did u use a new TB gasket? constant up and down idle is a vac leak/plug.

integ3 11-01-2003 11:28 AM

Re:Idle problem
 
I have this same problem on my '94 integra ls. But it only does it in the cold(winter months). I've replace the fast idle valve and pcv valve and no luck.

Can anyone help us??


All times are GMT -5. The time now is 02:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands