IACV Duty Cycle
#1
IACV Duty Cycle
Well I finally got the blasted y7 running.
99 y7 converted to OBD1
We place a y8 intake on it, with a z6 IACV. The car would idle at 3000rpm and climb. So if I blocked the IACV at the TB it worked fine.
Solution, pull the IACV off the manifold, and block off the hole. The car now idles at 1100rpm.
So the question is, Why is the IACV passing so much air around the throttle botle, it has done this with 2 different ECUs and2 different IACVs.
99 y7 converted to OBD1
We place a y8 intake on it, with a z6 IACV. The car would idle at 3000rpm and climb. So if I blocked the IACV at the TB it worked fine.
Solution, pull the IACV off the manifold, and block off the hole. The car now idles at 1100rpm.
So the question is, Why is the IACV passing so much air around the throttle botle, it has done this with 2 different ECUs and2 different IACVs.
Thread
Thread Starter
Forum
Replies
Last Post
Turblow
Hybrid/Tech
2
03-24-2006 03:15 PM