I cant figure this out (mounts)
 

When swaping a b18 into an EG, which civic / integra mounts do I use? I've searched all over here and honda-tech and cant find the answer.

Re: I cant figure this out (mounts)
 

i used the b series driver side mount, and d series tranny mount and rear mount, with integra shift linkage.

Re: I cant figure this out (mounts)
 

look at hasport they probly have engine mounts ment for this.

Re: I cant figure this out (mounts)
 

why buy hasport mounts when you can pretty much use the stock mounts, and im sure you can search honda-tecdh and you will find teh right b-series mount to use. I cant remember if it was tranny or drivers side, but i think its tranny.

Re: I cant figure this out (mounts)
 

You can use the driver's side mount from a 94-95 EX, they are the same as the Integra mount(3 bolt). The tranny mount can come from either an EG or DC and the rear mount is also the same. The front tranny and AC mounts that are on the chassis are fine, but you need the integra AC bracket and tranny mount. If you have other questions, or need pics let me know. I have a bunch of mounts.

Re: I cant figure this out (mounts)
 

The civic rear tranny mount will not bolt to the integra tranny. Can I just use the Integra mount?

Re: I cant figure this out (mounts)
 

Re: I cant figure this out (mounts)
 

AWESOME! Thanks whiterice

Re: I cant figure this out (mounts)
 

yea that last one is how mine is...the stock drivers side and rear trans mount did not work, only the pass. trans mount did

Re: I cant figure this out (mounts)
 

The motor is out of a 90 LS. Apparently none of the mounts work. Now I gotta track down some mounts. Damn.