i have a d15b vtec that iam gunna go boost and i need to know how to tap the back of the block ive looked in this forum and cant find anything please help

 

its not that safe to tap it for an oil line all you need to do is get a filter relocator sandwitch which is like 30 bucks and tap the oil pan il tap your oil pan for free if you want i live in miami too.

 

sounds good to me i would appriciate it i live around miami lakes and i will drive to where ever you are and iam gunna have to buy a that relocator thing

 

jus get like a blox oil sandwictch plate or be cheap and use a brass T fittin 1/8 NPT

 

lame-o, stealthmode oil adapter, ---- that sandwich bullshit.
it has outlets for your turbo, and gauge

 

acutally i think its tuner toys, and they are out of business. whoops

 

I used a T for the feed & relocated the filter to the front. Just make sure you have a restrictor in the feed to the turbo as they only need 10ish psi. Not much will kill a turbo quicker than feeding it 80 psi of oil!

 

where would the oil restrictor go?

 

I put mine between the turbo and the feed, the difficult bit is actually measuring the pressure. I'm using guesswork but it's been ok up to now, 18 months on a cheapo eBay T3.

 

------------- also sells the t and lines to run feed from your pressure sending unit. they also sell oil pressure restrictors.