how to modify stock crx shift linkage!
 

how much do i add while converting the stock crx linkage for a b16 ?

Re:how to modify stock crx shift linkage!
 

Put the linkage under the car measure, cut and weld.

Note: Measure twice cut once.

Re:how to modify stock crx shift linkage!
 

i know i heard somewhere like 3 inches your add to it.

Re:how to modify stock crx shift linkage!
 

I thought you take away????

Like TMonarky said: measure, measure, (MEASURE AGAIN!) then cut and weld.

Re:how to modify stock crx shift linkage!
 

you can use integra shiftlinkages but you have to get the shortened.. i dont think you can use you crx linkages because the trans is different like how the shift stableizer bar is and stuff... just buy some for the swap. tons easier!

Re:how to modify stock crx shift linkage!
 

my advice, spend the 100$... cutting and welding one can easily break unless your a solid welder. 2nd thing, you cant use the crx one because of how it mounts up to the tranny. So either get an integra shift linkage and shorten that by taking careful measurements or buy the hasport/hcp shift linkage

Re:how to modify stock crx shift linkage!
 

The only way to buy the Hasport one is to buy their mounts and get it as a package. I have been trying to get their linkage for a while but I dont have their mounts so tey wont let me have it ::)....looking for a used one...

Re:how to modify stock crx shift linkage!
 

i bought hasport linkage from them and i dont have there mounts :-\
you dont have to get the linkage straight from hasport, there are other places where you can get them from

Re:how to modify stock crx shift linkage!
 

www.camp1320.com has a good price on them, y cant the crx one be used? i dont understand?

Re:how to modify stock crx shift linkage!
 

what about using a shift linkage from my friends 00 ex?