How to Install Boost, Oil Pressure, Air/Fuel Gauges???????
 

wondering if anyone in here have installed Boost, OIl, Air/Fuel gauges before could show me how. The Gauged are ordered off of Ebay at this site: http://cgi.ebay.com/ebaymotors/ws/eB...MEWN%3AIT&rd=1

Hope this will help with the instruction. My engine base includes: T3/T4 Turbonetic Garret, 38mm Wastegate, Greddy Type S BOV, 450cc Injectors, Intercooler. I would like to know the pressure of the Fuel and Oil to not overheat or flood my engine with fuel. I know how to install the Boost Gauge but just want to share the info to double check. On my Boost Gauge (on the Back) has a plastic tube. I connected with the FPR vaccuum source by using a T fitting (i belive that's how it is, correct me if i'm wrong). I mostly like to know how to install the Oil Pressure Gauge. Someone told me to connect the Air/Fuel Gauge wires to my O2 sensor and some said that it's just for LOOK doesn't really do anything. If you have pictures, please post cause i'm a visual learner . Thanks

Re: How to Install Boost, Oil Pressure, Air/Fuel Gauges???????
 

The air/fuel gauge can be resold on ebay, cause it's not gonna do jack for you. The oil pressure you have to tap into either the oil pressure sender port, or if you have a firewall kit, or anywhere in your oil feed.

Re: How to Install Boost, Oil Pressure, Air/Fuel Gauges???????
 

Boost goes to a vacuum source off the intake mani. Brake booster is nice and strong :y