HOW THE HELL!!!!!!!!
 

do you remove the wires from the ecu plugs without breaking the pins,i need the help people.

Re: HOW THE HELL!!!!!!!!
 

Haven't had to do it personally, but from what I hear just use a precision screwdriver to pop them out.

Re: HOW THE HELL!!!!!!!!
 

smash the end of a paperclip with a hammer.

Re: HOW THE HELL!!!!!!!!
 

thanks on some of the info i'll give it a try.any more clues.thanks for the reply jago.

Re: HOW THE HELL!!!!!!!!
 

both of those worked when i tried it...

Re: HOW THE HELL!!!!!!!!
 

which end would i use the precision screwdriver,and also phillips,flat head or what.thanks

Re: HOW THE HELL!!!!!!!!
 

ok first go grab a mini screwdriver, or a eye glass tool kit.

eye glass tool
Attachment 18210

looking at the ecu side of the plug place the tool in the middle ( between the pins there is a little open space)
Attachment 18211

push the clip holding the pin in the plug towards the center of the plug. this will allow you to pull the pin out the back.
Attachment 18212

this gets easier the more you do it.

Re: HOW THE HELL!!!!!!!!
 

ok really easy on the clear plug but what about the 2 black plugs (b&c),those are a bitch to do atleast i think.
p.s. excellent photo's.

Re: HOW THE HELL!!!!!!!!
 

ive always used a needle on the black plugs.be sure to remove the plastic keepers.

Re: HOW THE HELL!!!!!!!!
 

yup, you'll get some good bite on the little plastic thingy that you're trying to pop up to release the pin.