How hard is it to change rear wheel bearings
 

I have a 89 CRX si. Since the rear brakes are drums. I decided to swap it to 91 integra disc brakes. But when i drive on the freeway. It sounds like the rear bearings needs to be changed. How hard is it to change it? Not exactly sure where the bearings are located at in the rear brakes. Do i need a press to get the bearings out or no?

Re: How hard is it to change rear wheel bearings
 

No its very easy. Just unbolts. slides off (sometimes needs to be pursuaded) and them bolt the new one back down. Its a whole hub asssembly, not just a bearing.

Re: How hard is it to change rear wheel bearings
 

ffor the rear wheel? not the front wheels

Re: How hard is it to change rear wheel bearings
 

4-5 minutes per rear wheel

jack up car
remove 4 lug nuts
remove drum/disc
pry off cover
remove 32 mm axle nut
swap hubs, reverse above steps.

Re: How hard is it to change rear wheel bearings
 

what if i want to keep my hubs and just change the bearings itself?

Re: How hard is it to change rear wheel bearings
 

can buy the parts that way.

$90 for a hub assembly