how to get power to the ecu

Reply Subscribe

Thread Tools

Search this Thread

01-22-2006, 09:41 PM

Ogubudiah

1.5 BAR

Thread Starter

Join Date: Oct 2004

Posts: 1,167

how to get power to the ecu

hey guys
I bought an 88 crx hf that somebody swapped in a D16a in it, and left the hf trany in it.
and it wont start, the fuel pump isnt priming and there is no spark, so I changed the main relay.
But they cut up the ignition harness so I can get it to turn over by touching some of the wires but no combination gets power to the ecu...
any suggestions on how to get power to the ecu or what to check?
what is the d16a from? (not d16a6...1st gen integra maybe?)
I need an ignition switch so let me know if ya got one.

01-23-2006, 10:31 AM

HMTguy

Guest

Posts: n/a

Re: how to get power to the ecu

First gen teg had d16a1 DOHC

01-23-2006, 01:22 PM

Ogubudiah

1.5 BAR

Thread Starter

Join Date: Oct 2004

Posts: 1,167

Re: how to get power to the ecu

well thanks jago ,,,but I got no 1 after my d16a

01-23-2006, 01:36 PM

HMTguy

Guest

Posts: n/a

Re: how to get power to the ecu

Since you're stock wiring harness is cut up, why don't you just run a separate power wire directly to your ecu, say from your fusebox?

01-23-2006, 02:20 PM

Tom-Guy

0.0 BAR

Join Date: Feb 2003

Posts: 0

Re: how to get power to the ecu

Quote:

Originally Posted by Ogubudiah

well thanks jago ,,,but I got no 1 after my d16a

JDM imported engine. Probably D16A6 equivalent.

I'm voting to replace vehicle wiring harness, ---- the dumb ----. I've repaired harnesses before when riceboys just started cutting (wires in the back half of the vehicle over a DPI-->MPFI conversion??) and it was never worth my effort.