how far can i rev a stock d16a6 before it blows?
i know the redline is at like 6250 ior 6500 on a d16a6 but the rev limiter is at 7k if im not mistaken...can it handle 7k shifts without blowing...well when i race that is...daily driving ill keep it under that.
lewis |
Re:how far can i rev a stock d16a6 before it blows?
power starts to fall off after about 6900 rpm so there is no need to shift that high.
|
Re:how far can i rev a stock d16a6 before it blows?
well my rev limiter was set around 7100ish (maybe more?) and i bounced off it a couple times with the 60/48 turbo (pulled all the way)...
|
Re:how far can i rev a stock d16a6 before it blows?
so i should shift at right before i hit 7k? around 6750 to 7k? because if i can shift to 7k then i should be fine...but im still going to get a cam.
will my stock valve springs and retainers be able to hold up to 7k shifts ? thanks lewis |
Re:how far can i rev a stock d16a6 before it blows?
ive done it a couple of times with 10psi of boost. wouldnt recommend it all the time though.
|
Re:how far can i rev a stock d16a6 before it blows?
ok thanks
|
Re:how far can i rev a stock d16a6 before it blows?
i reved my d15a3 to 8k before... someone messed with the ecu before i had it or something... no rev limiter.. i missed 2nd a couple times and pinned the tach... (87 crx si)
nothin broke... i also hydrolocked this engine 3 times... nothign broke :P |
All times are GMT -5. The time now is 07:06 PM. |
© 2024 MH Sub I, LLC dba Internet Brands