How do I set my fan to be on all the time
 

I'm just finishing my turbo kit install and I want to set my fan to be on all the time. How do I wire it to do that?


Thanks

Re:How do I set my fan to be on all the time
 

Could wire it to a switch like me.. Flick the switch, on until you flick it off. Worked great 8)

Re:How do I set my fan to be on all the time
 

thats what i did......i put the switch to my positive line then just hooked my ground to ,y valve cover ground and bam on by a flick of a switch.....

Re:How do I set my fan to be on all the time
 

What kind of switch? toggle?

Re:How do I set my fan to be on all the time
 

yup

Re:How do I set my fan to be on all the time
 

Or if your really hardcore, you can take a paper clip and jumper the fan switch with the 2 wires on the back of the block obd0, and on the tstat housing obd1/2. I do it all the time at the track. So when key on, the fan comes right on.

Re:How do I set my fan to be on all the time
 

I have mine spliced into the temp switch on the back of the block as well, I just flick the switch to short the temp switch and voila.

Re:How do I set my fan to be on all the time
 

Dosnt it affect the engine opperating temperatures if this is done? I mean the engine runs its best at a certain temperature, so is colder necessarly better?

Please explain your answer.

Re:How do I set my fan to be on all the time
 

not really. the coolant temperature in the engine is regulated by the thermostat, not the cooling fan. the engine runs most efficiently at a certain temperature, though going for peak power isn't generally very efficient. i think the idea behind leaving the fan on is to let the engine cool down as much as possible between runs. the cooler the engine components are, the less heat will make it into the incoming air before it's burned, meaning more power. also, if done properly, the ECU will run in it's warm up mode, richening the mixture a little, and potentially making more power. unfortunately, simply keeping the cooling fan on won't cool your engine much. if the engine isn't running, coolant isn't circulating through the radiator by any force beyond convection, in which case a relatively small volume of coolant ever has a chance of reaching ambient temperature. if the engine were running, it would be producing more heat which would be counter productive. maybe if you combined the radiator fan with an electric water pump that bypasses the thermostat... then all the hot coolant would circulate through the radiator when the engine's off. but if you're going to go that far, why not put the money into something that has the potential to make over 1 hp.

Re:How do I set my fan to be on all the time
 

i cant get mine to turn off aand it is pissing me off. no high hp applications just a commuter car it has done it since ive bought the car and is quite annoying. any inf