i'm putting a D16Y8 engine in my CRX SI and i need some help tunning my ECU to run the VTEC

 

toggle switch

 

heres what you do first you buy my chipped pm6 for 75shipped than you burn a y8 map to it and rerire you ac relay to activate vtec

 

all you need to do is when you want it to activate the solenoid...just yell "OMFG VTEC!!!" Then brace yourself

 

on a serious note best way would be chip a pm6 with turboedit and run 1 wire vtec with d16y8 maps, look up that.

 

i unfortunately don't know how to modify my ecu . the wiring i can do if i have some sort of instructions or a diagram .

 

You can send your PM6 ECU to Xenocron and get it chipped and buy a chip burner and all of the ---- that you need. If you want to go cheap (since you do have a Si) just throw the motor in your CRX. Your D16Y8 will run with your stock D16A6 distrbutor and PM6 ECU just fine but you won't have VTEC. You can wire the VTEC with a toggle switch and be on your ------- way :P

 

i plan on keeping A/C and running a turbo .i found someone to build my manifold i just need some help on the tuning side of things . so the PR3 ECU will work . it will just run a little rich ? that would be good for turbo right ? can anyone point me in the right direction for wiring instructions i will need ?

 

cookie

 

what does that mean