how do i install a fuel pressure regulator ?
 

like it says how do i install a fuel pressure regulator ?

Re:how do i install a fuel pressure regulator ?
 

you just undo the two bolts that are on the stock fpr, unhook the fuel return line from the bottom of the stock fpr, unhook the vacuum line on top of the fpr, then put the new one in and hook the fuel return and vacuum line back up.

Re:how do i install a fuel pressure regulator ?
 

The B&M FPR might require you to cut the top off of your old one.

http://www.c-speedracing.com/howto/fpgauge/fpgauge.php

Re:how do i install a fuel pressure regulator ?
 

oh yeah, you're gonna want to relieve your fuel pressure before you remove the old one, or anyting to do with fuel components for that matter, just loosen the banjo bolt on top of you fuel filter and it will let the fuel pressure out. ALWAYS SMOKE CIGGARETTES WHILE WORKING ON YOUR FUEL SYSTEM!!

Re:how do i install a fuel pressure regulator ?
 

oh cool no problem i will be sure to take pics while i smoke and put my face extremely close to the fuel filter thanks for the great tips guys

Re:how do i install a fuel pressure regulator ?
 

your a butt plug. do some reseach you lazy ----

Re:how do i install a fuel pressure regulator ?
 

Well if you bought the FPR it should have instructions that came with it

Re:how do i install a fuel pressure regulator ?
 

How about you shut the ---- up HOTREX and quit talking ---- to everyone.

Re:how do i install a fuel pressure regulator ?
 

fuckassshitbitchcunttitdickslutcumass

Re:how do i install a fuel pressure regulator ?
 

shut your mouth bitch

Re:how do i install a fuel pressure regulator ?
 

i figured it out thanks ,how much boost should i go with ? i tried 75 but it was too much the engine was getting too much gas so i cut it down to 50 and thats where its at now and seems to be fine .

Re:how do i install a fuel pressure regulator ?
 

its not boost....and for a stock motor, leave it stock. you dont even really need a fpr for boosted applications

Re:how do i install a fuel pressure regulator ?
 

if you're na, you actually want to take as much fuel as possible out, not add fuel. want to run a little closer to lean, just start lowering the pressure a little at a time and take it for a test ride (be sure to romp it), if you don't hear detonation/pinging, then lower it some more, keep doing this until you hear pinging, then add a little bit, and you'll be right on the edge. also pull your plugs and read them, lighter/whitish = lean, dark = rich.

Re:how do i install a fuel pressure regulator ?
 

cool thanks did you send them back ? if i change the lenght of the hoses (vacum) does that affect anything ? so leaner is better whats a ping or knocking sound like ? when the car sputters ?

Re:how do i install a fuel pressure regulator ?
 

no, i'm stopping by the post office today, i've been busy as ----. detonation/pinging occurs when you run too lean, you'll know it when you hear it, then you need to add some more fuel. the car won't sputter, that's what happens when you're running rich, kind of bogs.

Re:how do i install a fuel pressure regulator ?
 

do i get more hp from the fpr ? i doubt its a lot like 5 hp ? when i put on the turbo i need to run rich correct ?

Re:how do i install a fuel pressure regulator ?
 

the fpr is not sufficient for a turbo setup

Re:how do i install a fuel pressure regulator ?
 

im going with 6psi of boost on the turbo so i at least need a fmu ? anything else better that wont cost me an arm and a leg to buy ?

Re:how do i install a fuel pressure regulator ?
 

C'mon... You got two of each...! ;)

Re:how do i install a fuel pressure regulator ?
 

ha ha very funny , is it alot of work to drop in a gsr into my del sol that has a sohc ?