ok on my intake manifold, i have the three plugs hooked up, eacv, iat and tps. then i have the hoses. can some one help me out with where they go. there are two on the eacv, ones already hooked up to the manifold, where does the other on go? one underneath the manifold and one on top near the intake "mouth" also, in the engine bay there is one right above the brake master cylinder and one underneath the manifold where the coolant lines come out, but its not one of the coolant lines. someone please help me out with this?

 

go into the User Manuals section at the top of the forum. download the manual for your car, read it, its all there.

 

on the dpfi to mfpi swap, its says connect yellow black wires from the dx harnesses to the yellow black on the resistor box, i found 4 yellow black wires...is that right or are there just two?

 

o and all the hose connections i had were right..thanks
just neededa double check

 

The four black wires are on the engine side of the plug. what are the color of the wires coming out of the resistor box? all the yellow black wires go to the four red wireson the box.

 

i dont think thats right, it says splice all yellow black wires from the dx injectors. there are to plugs each have a yellow black wire. and the other plug has to 2 yellow black wires. the 4 wires on the resistor box go to the left side wire on the injector plugs. i think that i am suppose to only put the two yellow black wires from the dx injectors to the yellow black on the resistor box. ill try that