how the hell am i suppose the reconnect the horn on a 91 civic si? when i had the stock steering wheel the horn wasn't working, even when i got the autozone wheel w/ 2 horn buttons...and what's the little metal peice sticking out behind the steering wheel, everytime that thing touches metal the horn goes off...does anyone know how to explain it to me or give me a site on how to install it for a 88-91 civic? Need help ASAP so i can get my inspection done..!!!

 

i believe a horn is a very simple device...worrst case you could just run a 12v line to ur horn that uses the buttons as a switch

 

the little metal piece you are referring to is called a shoe horn. its on cars that have a steering wheel with no airbags or cruise control...you need it to install the SiR steering wheel. it should always be contacting the back metal plate of the steering wheel. if its causing the horn to go off...id say the problem lies with the wiring or switch in in the steering wheel. any pictures of what you have exactly? hope this helps.

 

here is a link from HT on how to install the sir steering wheel on an eg...it might help show you what i mean about the shoe horn.
http://www.honda-tech.com/zerothread?id=273474

 

the link helps a little, but i'm not sure if it's b/c of the wiring or switch...i already installing the steering wheel on but if that shoe horn touches the back metal peice or anything metal, the horn will go off forever until i take out the fuse...plus i haven't even connect any wires from the buttons yet, i just used some electric tape to tape the shoe horn so it doesn't touch any metal and so it won't go off for now....