HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   Honduh Exhaust studs (https://www.homemadeturbo.com/hybrid-tech-8/honduh-exhaust-studs-59076/)

Loserkidwac 04-06-2006 02:01 PM

Honduh Exhaust studs
 
Well i need to get some extended exhaust studs fir my turbo mani to bolt on, anyone know here i can get a set or what size they are so i can order some, I looked on arp's website but didn't see any for honda or acura, any help would be great, thanks...Matt

Bone1 04-06-2006 02:27 PM

Re: Honduh Exhaust studs
 
Chevy V6 exhaust studs, 3100/3400/3800

Loserkidwac 04-06-2006 02:34 PM

Re: Honduh Exhaust studs
 

Originally Posted by Mista Bone
Chevy V6 exhaust studs, 3100/3400/3800

awesome, I'll check them out later are they longer than the stock honda or get the exteded chevy studs?

Bone1 04-06-2006 02:42 PM

Re: Honduh Exhaust studs
 
longer than Honda, same threads.

Loserkidwac 04-06-2006 03:02 PM

Re: Honduh Exhaust studs
 
You're a good man Charlie Brown ;)

rudebwoy 04-06-2006 04:11 PM

Re: Honduh Exhaust studs
 
or you cna take all the studs out and use longer 12mm bolts

Ravage70 04-06-2006 04:17 PM

Re: Honduh Exhaust studs
 
d and b is different size

Loserkidwac 04-06-2006 04:21 PM

Re: Honduh Exhaust studs
 

Originally Posted by Ravage70
d and b is different size

I'm looking for B series, LS motor

danronian 04-06-2006 06:33 PM

Re: Honduh Exhaust studs
 
I'm pretty sure Spoolin Performance sells their log manifolds w/extended stud kits. If you can't find help here shoot them an emaill.

0b00st0 04-06-2006 06:44 PM

Re: Honduh Exhaust studs
 

Originally Posted by Ravage70
d and b is different size

You are a retard? Next time, verify, verify, then post. :1

They both use 10mm x 1.25 or 1.00 or whatever the common 12mm socket is.

Ravage70 04-06-2006 06:57 PM

Re: Honduh Exhaust studs
 
woboy my mistake
i think i rememeber trying a bolt that didnt fit the exhaust
i just checked again and it works

IntaCooler 04-06-2006 07:02 PM

Re: Honduh Exhaust studs
 
im lookig for one of thoses studs so if your gonna pull your studs can you send me a few
one of the studs broke off my b16 head
stick it in an envelope and ill send you a buck paypay matt

Loserkidwac 04-06-2006 07:12 PM

Re: Honduh Exhaust studs
 

Originally Posted by g_shok
im lookig for one of thoses studs so if your gonna pull your studs can you send me a few
one of the studs broke off my b16 head
stick it in an envelope and ill send you a buck paypay matt

I have 2 other LS heads sitting here I can just take one off of them for you, pm me


Thanks MADMAX for the size, I found a few places that list them by size and not vehicle/make

0b00st0 04-06-2006 08:04 PM

Re: Honduh Exhaust studs
 
I'm not sure on the thread pitch however. It might be 1.25 or 1.00. Diameter is 10mm though.

SmellySOHC 04-07-2006 10:33 AM

Re: Honduh Exhaust studs
 
pretty sure its 1.25

ichbinsobose 04-07-2006 06:52 PM

Re: Honduh Exhaust studs
 

Originally Posted by SmellySOHC
pretty sure its 1.25


Bone1 04-11-2006 09:27 PM

Re: Honduh Exhaust studs
 
your not gonna find anything cheaper than the GM studs.

My buddy ports the 3100/3400/3800 heads for Milzy Motorsports.


All times are GMT -5. The time now is 10:56 AM.


© 2024 MH Sub I, LLC dba Internet Brands