Hey guys I thinking of installing a quick kill switch on my 94 Accord until I get a car alarm. My plan is to put a simple kill switch in between the starter signal. Let me know if this will work or suggest a better approach, thanks.

 

fuel pump kill switch is easiest
do it

 

Does that mean tapping the fuel pump at its mounting location?

 

You just put a .25$ switch inline with the black/yellow power wire under your backseat.

 

nope i would follow that wire and spice it off and hide the switch in a good place liek i did on my car i wont tell you were mine is but you shoould find your own place so NO one knows dont post on the forum were your switch is!
there is too mcuh **** that steal ---- out there..

 

put a switch inline for the ecu power

 

solder your ECU plugs onto RJ45 connectors and take your ECU with you when you go.

 

or you can make you main relay easy to reach and just take that with you

 

Fuel pump ground between the taillights always gets the n00bs, a lot of people know how to jump main relays and jump starter solenoids without missing a beat. In the long run, running odd MAP/injector/fuel pressure combos and taking the ECU is the best way to foil the amateurs that don't have roll backs.

Kinda scary, I wouldn't care to drop injector power across RJ45.

 

Didn't think of that.

I saw someone that did a VAFC with the RJ45.