HMT Sensor testing
 

So i've been doing open heart surgery on my civic. I know you guys will hate, but i'm putting in a b16, and i've tucked every possible wire in the engine bay, including some stuff on the wiring harness. So make sure everything is good before i bolt it in, i decided to hook everything up. Here's the neat part. To see if i have spark (which i was worried about because i also had to rewire the dizzy and it was my frist time doing that), i stuck part of a allen wrench in the center of the back of the distro, threw it in a drill, and the mofo sparks!! Ha it was great.

But my question is, i couldn't hear the injectors clicking. So i'm wondering if they're not making any noise because there isn't any fuel pressure? I had a stethoscope on them and i couldn't hear ----. Tomorrow i'm gonna rig up a HMT noid light of some sort and make take some video. You guys gotta see how gangster this is

Re: HMT Sensor testing
 

alright, here's the video so you guys can understand what i was trying to accomplish

http://smg.photobucket.com/albums/v2...t=Bserious.flv

I did end up getting the injectors to click. Not totally sure what the issue was but i think my main problem was with grounds because the motor wasn't grounded (since it's not installed) and the pcm didn't turn on. But everything works :)