HomemadeTurbo - DIY Turbo Forum

HomemadeTurbo - DIY Turbo Forum (https://www.homemadeturbo.com/)
-   Hybrid/Tech (https://www.homemadeturbo.com/hybrid-tech-8/)
-   -   hf and si (https://www.homemadeturbo.com/hybrid-tech-8/hf-si-9977/)

90civicdxtobezx 09-22-2003 06:38 PM

hf and si
 
i just bought a 90 crx hf and i was wondering if the MOTOR will bolt up in my 90 civic dx hb. i just moved 50 miles away form my job and i need better gas milage. can it bolt up to the si trans

OnYx 09-22-2003 08:00 PM

Re:hf and si
 
it should all be interchangeable except for the wiring harness. You would have to modify the DX harne3ss tow rok with the fuel injectors on the DX motor

alwaystootall 09-23-2003 12:19 AM

Re:hf and si
 
looking for better gas milage....si tranny prob not best way to go

Guy-Fast 09-23-2003 01:18 AM

Re:hf and si
 
Ya I have owned both a 4spd std hb and a crx hf and they got about the same mpg give or take a couple. I say just add a hf tranny to your hb.

90civicdxtobezx 09-23-2003 09:17 PM

Re:hf and si
 
in my 90 civic dx i already have a zc in there and a si trans. the hf trans has a hole about the size of a softball so its useless.

for the swap i was planing on switching everthing wiring and all. the rex has a bent frame so it will be down for a while and it will give me a reason to build my all motor zc

thanks for the help

SpeedyJAY 09-23-2003 10:07 PM

Re:hf and si
 
You are going to need an injector resistor box, and the wiring diagrams to wire a Dual Point injection into the Hf's MPFI Its easy to do, just a few wires to connect and such. Diagrams are easy to find try resource.crx.net

Oh and a fun mod to do is pull the Hf 5th drive gear and put it into your ZC tranny (yes it fits)I am about to do this myself as I tend to make long road trips and the ZC tranny tends to rev a bit high for my taste at freeway speeds

crxrx7 09-24-2003 09:31 PM

Re:hf and si
 
Heres the deal. If you just want to put the engine in you dx hatch, you don't have to do any wiring of any sort if you keep your manifold from your dx. All you do is take out the engine of your hatch, take off the intake, pop it on the hf and throw the hf in your hatch. Everything bolts up. But if you don't want to do that follow what the other guy said about the wiring. ;D

90civicdxtobezx 09-24-2003 11:05 PM

Re:hf and si
 
none of you understand that i already have dome my MPFI swap and not to realy turd on ur guys help. i dont think i want to take a cut in my hp. so no hf in my daily driver.

thanks for the help though guys!


All times are GMT -5. The time now is 03:30 PM.


© 2024 MH Sub I, LLC dba Internet Brands