HELP!!! ZC head gasket
Ok i know that a zc uses a 90 b20 head gasket but imma turboing my zc and i heard about some people using 2 head gastket to lower there compression, is that safe? or do they make a specific head gasket for the zc to lower the compression???
|
Re:HELP!!! ZC head gasket
No, you dont use the b20 head gasket for the zc, you use the d16a1 integra head gasket. I'm 100% positive on this, I've worked on several zc's. The only thing you use from the prelude is the timing belt, and thats it.
As far as lowering the compression ratio, I wouldnt even worry about it, It's plenty safe. Never stack gaskets. Jeff |
Re:HELP!!! ZC head gasket
The only thing you use from the prelude is the timing belt, and thats it. steve |
Re:HELP!!! ZC head gasket
yeah the t-belt is from a 90 lude si. Just did mine not too long ago.
|
Re:HELP!!! ZC head gasket
cometic head gaskets, they make a zc one. It is a d16a1 integra head gasket. And the timing belt is for a 2.0 prelude.
|
Re:HELP!!! ZC head gasket
go check out
http://www.thezcr.com it is a good site for specific ZC information lol when i flopped my headgasket i just used the used timing belt...ended up breaking it a week later lol now i can swap a timing belt in about 35mins |
All times are GMT -5. The time now is 01:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands