Help request: Reassembling a TB
#1
Help request: Reassembling a TB
hello everyone,
i'v disassembled a b-series TB that i had and i cant remember how to reassemble it.
please help
the first q:
where should the numbers carved on the plate should be? is that ok? (i'm asking this cause on my d serise the numbers on the upper half on the back of the TB)
second q about the rod:
should the tps bracked face this direction? or the other way around?
thanks for any help
i'v disassembled a b-series TB that i had and i cant remember how to reassemble it.
please help
the first q:
where should the numbers carved on the plate should be? is that ok? (i'm asking this cause on my d serise the numbers on the upper half on the back of the TB)
second q about the rod:
should the tps bracked face this direction? or the other way around?
thanks for any help
#3
Re: Help request: Reassembling a TB
#'s are on back side
2ndly your inner throttle spring is placed wrong
the little hook belongs on the flat notch this is used to tension the spring properly
if spring is not tensioned correct tps and throttle will be way off
also the throttle when assembled correctly needs to be slammed shut numerous times has hard has you can by relasing the throttle rotoe
this will seat the plate
This may cause the throttle to become stuck hence the seating part. Large plyers and wd40 will release the plate from the base
Then repeat until plate no longer sticks
Yes I have done this maybe once or twice in my life
2ndly your inner throttle spring is placed wrong
the little hook belongs on the flat notch this is used to tension the spring properly
if spring is not tensioned correct tps and throttle will be way off
also the throttle when assembled correctly needs to be slammed shut numerous times has hard has you can by relasing the throttle rotoe
this will seat the plate
This may cause the throttle to become stuck hence the seating part. Large plyers and wd40 will release the plate from the base
Then repeat until plate no longer sticks
Yes I have done this maybe once or twice in my life
#4
Re: Help request: Reassembling a TB
Originally Posted by chris
#'s are on back side
2ndly your inner throttle spring is placed wrong
the little hook belongs on the flat notch this is used to tension the spring properly
if spring is not tensioned correct tps and throttle will be way off
also the throttle when assembled correctly needs to be slammed shut numerous times has hard has you can by relasing the throttle rotoe
this will seat the plate
This may cause the throttle to become stuck hence the seating part. Large plyers and wd40 will release the plate from the base
Then repeat until plate no longer sticks
Yes I have done this maybe once or twice in my life
2ndly your inner throttle spring is placed wrong
the little hook belongs on the flat notch this is used to tension the spring properly
if spring is not tensioned correct tps and throttle will be way off
also the throttle when assembled correctly needs to be slammed shut numerous times has hard has you can by relasing the throttle rotoe
this will seat the plate
This may cause the throttle to become stuck hence the seating part. Large plyers and wd40 will release the plate from the base
Then repeat until plate no longer sticks
Yes I have done this maybe once or twice in my life
but i cant remember one thing...
should the inner throttle spring be tentiond? or just function as a 1 side spring?
edit:
is it ok now?
#7
Re: Help request: Reassembling a TB
Originally Posted by chris
inner is tensioned this is the hardest thing to get right
tps needs to be faced down not up towards the hood
tps needs to be faced down not up towards the hood
is that ok n the new pictures? (the tps butterfly it tention to both sides....
Originally Posted by 88dx
Why did u take it apart in the first place?
i wanted to bore it on a lath....
#10
Re: Help request: Reassembling a TB
tensioned
trust me getting it right isnt easy
I have my own trick of assmebling throttle bodies has I have to do it so much but it took me forever finding a quick way of doing it and I sure has hell aint letting it out of the bag conserding its how I buy my candy and soda
trust me getting it right isnt easy
I have my own trick of assmebling throttle bodies has I have to do it so much but it took me forever finding a quick way of doing it and I sure has hell aint letting it out of the bag conserding its how I buy my candy and soda