Set up: b16a1 into a 88 honda crx with si wiring harness.

I have a b16a1 and i took all the lines/hoses off the block and now i cant figure out where some of them go.

1. on the back of the block right above the oil cooler/filter there is a fitting that comes out the block; where does that connect to?
its in the first picture with the RED arrow

2. on the oil cooler/filter there are 2 outputs i know where the go but one that goes to the end of the intake manifold, right next to the coolant line, i dont know what the line/hose looks like because of the 2 different sizes on the fittings.
The blue arrows show where im talking about. if they dont go to each other then please explain where they go.

3. i found a hose that has a one way valve in the middle (grey) one end has a curve to it; i dont know where that goes.

4. if any one has the piece that goes onto the TB, i forgot the name. I took a picture of it(where its suppost to go) 3rd pic green arrow. NEED ASAP!!

if any one can help or can get me pictures of the back of a b16 to show me how to hook it up it will be appreciated. also i can get pictures tomorrow when i go back to my shop if needed.

contact me:
AIM - cyphis7x
E-MAIL - cyphis2000@aol.com

 

on the back of the block right above the oil cooler/filter there is a fitting that comes out the block; where does that connect to?
that connects to the pcv valve

i found a hose that has a one way valve in the middle (grey) one end has a curve to it; i dont know where that goes, where is it located on the engine

 

sent email