Help me out HMT
 

So I want to know if I can replace my D15b7 with a D16a6. I have the B7 in the car with 8psi on xeno basemap and that was the plan for now till I get around to my Z6 build. I have the whole A6 so.......Is it possable to bolt motor in and then make dizzy jumper and rape....................I was just gonna use A6 block, head, and dizzy


What do you thing and will it work this easy?

Re: Help me out HMT
 

do that ---- mang..... damn this nigga posted this on 2 forums.... do that ----. a6>b7

Re: Help me out HMT
 

Trying to get ---- done! ---- that other site HMT foever and ever

Bout to get an HMT tatoo on my ------- forehead I love this site so much!



So just make a dizzy jumper is the only thing? Right

Re: Help me out HMT
 

what year car

Re: Help me out HMT
 

B7= 92-95 civic dx

Re: Help me out HMT
 

must use b7 engine bracket a6 is meant for crx chassis mount wont fit correctly

Re: Help me out HMT
 

Your b7 dizzy should just bolt up to the a6 head. BTW use z6 inakemani if you have it. A6>b7 any day. :y

Re: Help me out HMT
 

On the timing belt side, right

I'm rocking my Z6 intake maifold, been rocking it ever since I put the D15b7 in there
I'm going to double check the dizzy before i go playing with wires

Thanks HMT

Re: Help me out HMT
 

Instead of using the temp sensor on the back of the block, I grabed a water tube off an old D15b7 that has the temp sensor on the therostat housing and swaped that on the motor while its still on the engine stand. I just need to do oil pan tapping and slap this bitch in my car.

Does anyone know for sure about the dizzys and what i can do?

Re: Help me out HMT
 

use obd1 dist you have on a6 same bolt pattern