turbozexcrxman

Yeah I was wanting to know if I got to change the throttle cable on my 88 crxsi when puttin my b18a in?

TMonarky

Yes. you need the one from the integra.

LSD Motorsports

No you dont need a different throttle cable, the only motor swap that would require a different throttle cable would be the gsr. The b18a motor sits the throttle body right near that of the d series, If you want to use a crx dx cable, you can do that as well

yellowcrx6

when i ordered my mounts and linkage ... it came with a new bracket which worked out very well. i had to make one of the holes wider, but other then that it was good

i dunno if you've begun the swap yet, or are just researching, but i got my stuff from jdmshit.com ... they sent me 1 wrong mount, but that ***** typical for me

turbozexcrxman

Thanks alot for the info im goin to my shop right now to hook it up almost done with it all, but one more thing the transaxle seal were the axle hooks up to the left side leaks and my friend told me to use 92-95 civic seals, do u know if this is true?

brax90si

dude get the integra throttle cable it will make the throttle cble sit right, the si throttle cable will be to short u will have to use hose clamps to keep it at the right throttle, i have seen it before, it is ghetto, just go to junk yard and steal a throttle cable that is what i did for my b16a swap into my 90 civic si.

brax90si

also i had the same problem with the seal just get one form discount for a integra..