BLaze

I have a 91 CRX PR4 ECU B20. non obd wiring. I had to add two injectors when I did the swap. I cannot get my car out of limp mode. I do not have my wires mixed up B10-orange to the dizzy and B12 to white @ the dizzy. I tested the wires to see if the CAS is bad, but its not! What else could the problem be? I have tried every combanation of wires and still code 4. If anyone can help please post!!!

thanks

Blaze

BLaze

Well I undid the little clip on the dizzy w/ two wires and reset the ECU and now the B20 is hauling nutts!

Thanks

Blaze

RENR

good to hear! now where the hell are thepics!?