Help-Bearing Clearance
 

hey guys.I need some help.well basically im did a zc sohc swap in ma 91 civic dx.I ran 15.127@88 mph with the current mods.Zc block (p2e) with crank,pm7 pistons,vtec head (p08) with cold air intake 3 inch,dc sports 4-2-1 extractors mated to a 2.5'' straight pipe,crome tuned.But after several rans the motor gave way.It throwed a rod through the block.So basically i want to do a rebuild but i dont know the specs for the bearing clearance and wat size plastigauge to use.I kindly asking if ne a you guys can help me with the specs for the bottom half build up.Ma aim is to do it once and do it right. ;)

Re: Help-Bearing Clearance
 

Get the green plastigage, not the pink stuff.

There's a shop manual you can download from a sticky at the top of this hybrid/tech section that has your answers.

Re: Help-Bearing Clearance
 

You came to hmt just to ask this question? Man google owns you. You better get your mother ------- flame suit on and read the god damn rules!!!!!!!!!

Re: Help-Bearing Clearance
 

grow the ---- up !!

Re: Help-Bearing Clearance
 

---- YOU ROOKIE :X

Re: Help-Bearing Clearance
 

rebuilding a block with a hole in it=buying a new block. Are you getting aftermarket internals? if not, just find a junkyard motor

Re: Help-Bearing Clearance
 

and why bother with plastigauge? if you are using stock bore ---- since you broke your block just put it together. honda d motors are like SBC's you can basily kick the ---- all over your garage floor for a week or so then assemble and it will still run.

Re: Help-Bearing Clearance
 

:l

Re: Help-Bearing Clearance
 

welln obviously its a new block >:( i sometime wonder y ppl got to be so....Neways thanks for the info jagojon3 :y