Headgasket
I replaced my headgasket last weekend (D16 HMT - 95 Civic EX)... I finally got everything back together this weekend, started it up and let it run for awhile (refilling the radiator, etc...)
How can i find out for sure that's sealed properly? I cleaned up the head and block kind of ok before I put it back together. Used NEW ARP studs with a Cometic headgasket. Compression is 150 to 170. Nothing noticable on the plugs. A little bit of white smoke out the tailpipe, but it's cold out. No drips... Or do I need to take it for a long drive? |
Re: Headgasket
all it really needs is one heat cycle to seal, just drive it hard and you'll know if it sealed :6
|
Re: Headgasket
10psi+ is always a good indicator.
|
Re: Headgasket
Originally Posted by CSaddict
10psi+ is always a good indicator.
|
Re: Headgasket
Originally Posted by CSaddict
10psi+ is always a good indicator.
|
All times are GMT -5. The time now is 08:20 AM. |
© 2024 MH Sub I, LLC dba Internet Brands