Head porting and 3 angle valve job
07-25-2003, 06:56 PM
#2
3.0 BAR
Join Date: Jun 2003
Posts: 6,857
Re:Head porting and 3 angle valve job
I looked into this before i decided to turbo the bitch and yes it is but you have to be carefull where you have it done.http://www.alaniztechnologies.com/ This guy seems to be one of the guys who nows his ----.If you are not carefull who you choose to do the P&P you might end up with a head that wont flow right and that will rob you horsepower.
07-25-2003, 06:58 PM
#3
3.0 BAR
Join Date: Mar 2003
Posts: 21,479
Re:Head porting and 3 angle valve job
Mine was done at Gude. It looked pretty good. I'm not sure if it made that big of a difference since I had a Gude cam installed at the same time. If you're looking for the absolute most horsepower I would say go for it.
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
__________________
Best Car Insurance | Auto Protection Today | FREE Trade-In Quote
07-25-2003, 07:08 PM
#4
3.0 BAR
Join Date: Jun 2003
Posts: 6,857
Re:Head porting and 3 angle valve job
Gude is a reputable place. that was one of the other places i was looking but now i want bang for the buck.Im going to do something mild my self like gasket match both intake and exhauts ports and polish the ports too.I dont know if this will help but i like shiny stuff.even if i cant see it!
07-26-2003, 09:56 PM
#6
0.0 BAR
Join Date: Jul 2003
Posts: 6
Re:Head porting and 3 angle valve job
The Cylinder head is your powerplant basically.
Like said, be careful who you send it to, just because a shop has "experience" in P&P etc doesnt mean they are good even decent.
Dunno where you live but, sometimes shippin your head away for those extra few days is the difference in winning and losing.
Gatlin Racing ask for Jesse
St. Louis, Missouri 63143
Phone (314) 645-6633 Fax (314) 645 3846
they should be able to price quote you how much it would cost, they can work some miracles on Cylinder heads...just will cost you some money, and a little time.
Like said, be careful who you send it to, just because a shop has "experience" in P&P etc doesnt mean they are good even decent.
Dunno where you live but, sometimes shippin your head away for those extra few days is the difference in winning and losing.
Gatlin Racing ask for Jesse
St. Louis, Missouri 63143
Phone (314) 645-6633 Fax (314) 645 3846
they should be able to price quote you how much it would cost, they can work some miracles on Cylinder heads...just will cost you some money, and a little time.
07-27-2003, 01:44 PM
#7
3.0 BAR
Join Date: Jun 2003
Posts: 6,857
Re:Head porting and 3 angle valve job
LIke i said before if they cant provide the job with a before and after folw chart dont do it.The flow chart can be faked dont get me wrong but talk to the techs.at what ever shop you go with.Just remember that some bare foot,backyard mecanic is not the guy to trust on doing the job.
Thread
Thread Starter
Forum
Replies
Last Post
hotrex
Turbo Parts For Sale
12
11-16-2003 12:01 AM
