head gasket thinkness
 

How thick is to thick? I an workin on my ls build and the pistons I for raised my ------- compression not much only 9.71 but is I run a .060 head gasket that should put me around 9.04. Or just say ---- it it go with the .074? I dunno need suggestions

Re: head gasket thinkness
 

9.7 is good i would go oem honda w/copper spray that is a nice cp ratio to have you will spool faster make more power with less boost and torque will be fairly impressive

Re: head gasket thinkness
 

Leed runs the .074 on his car. But id just run a stock HG

Re: head gasket thinkness
 

I was thinkin the .036 should put me around a nice 9.51. I was just wondering if you could go to thick on a head gasket

Re: head gasket thinkness
 

thick headgasket offsets decked blocks and shaved heads, easier to just run oem thickness

Re: head gasket thinkness
 

thicker hg tend to leak oil at corners of the head also at least all of mine did

Is it possible to run (2) OEM HG...?

i would run the stock hg

porn