How thick is to thick? I an workin on my ls build and the pistons I for raised my ------- compression not much only 9.71 but is I run a .060 head gasket that should put me around 9.04. Or just say ---- it it go with the .074? I dunno need suggestions

 

9.7 is good i would go oem honda w/copper spray that is a nice cp ratio to have you will spool faster make more power with less boost and torque will be fairly impressive

 

Leed runs the .074 on his car. But id just run a stock HG

 

I was thinkin the .036 should put me around a nice 9.51. I was just wondering if you could go to thick on a head gasket

 

thick headgasket offsets decked blocks and shaved heads, easier to just run oem thickness

 

thicker hg tend to leak oil at corners of the head also at least all of mine did

 

Is it possible to run (2) OEM HG...?

 

i would run the stock hg

 

****