Head gasket
This might be a dumb question but if you get your cylinders over bored .5mm do you need to get a .5mm larger head gasket??
I have a ZC engine that was overbored .5mm, will the stock acura integra head gasket be arlight or do I have to get a larger head gasket? |
Re:Head gasket
im pretty sure u can have stock head gaskets bored out as well. (not 100% positive)
|
Re:Head gasket
.5 isnt much, in fact you probably will be fine.. You can do it your self with a whippitie, just be real careful, or you can have someone bore it out slightly..
|
Re:Head gasket
That is what I figured, .5 isnt much, I'll be fine. But my next problem is 1 of my head bolts destroyed the threads in the block, I am going to have to go back to the machine shop again and get it sleeved.... ARRGH!!! I want my car up and running, The weather is getting nice and I am sick of driving a piece of ---- tracker.
|
Re:Head gasket
HAHA !!!! i have done the sameeeeeee thing..but u can fix it in 10 seconds...just buy a heli coil and put it pretty deep in the threaded bolt hole..its that easy.they sell heli coils at ACE hardware and O'riely auto parts.
|
All times are GMT -5. The time now is 05:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands